Monostable Tetrahedron: The Pyramid That Always Self-Rights
Quick answer: A monostable tetrahedron is a four-faced solid with only one stable resting face on a horizontal surface: set it down on any other face and it tips until that face is down. With uniform density this is impossible, as Conway and Guy showed in the 1960s. In June 2025, Gergő Almádi, Robert Dawson and Gábor Domokos built the first working model, nicknamed Bille: a 120-gram, 50-centimeter frame of hollow carbon fiber with a heavy tungsten carbide weight.
Drop a die and it can land on any of its six faces. Each face is a stable resting position. Now imagine a shape with only one stable face: however you put it down, it tips over until that face is on the table. Can a tetrahedron, the simplest solid with flat faces, do that? It took almost 60 years to answer and build one.
Stable and Unstable Faces
Imagine drawing a vertical line straight down from an object’s center of mass. If that line meets the table strictly inside the face the object rests on, the object stays put: that face is stable. If the line lands outside the face, gravity tips the object over an edge. A monostable solid has exactly one stable face. (On rough terrain or after a hard bounce, real behavior can differ; the math is about resting on a flat surface.)
| Object | Stable resting positions |
|---|---|
| Uniform cube or die | 6 |
| Uniform regular tetrahedron | 4 |
| Any uniform tetrahedron | At least 2 |
| Weighted toy like a roly-poly doll | 1, but it has a curved bottom |
| Monostable tetrahedron (2025) | 1, with four flat faces |
The History
- 1966 to 1969: John Conway and Richard Guy asked whether a uniform-density tetrahedron could be monostable, and showed it could not.
- 1984: Conway described to Dawson the possibility of a suitably weighted monostable tetrahedron, but never published a proof.
- 2006: Gábor Domokos and Péter Várkonyi built the gömböc, a smooth, uniform shape with just one stable and one unstable balance point. Domokos then asked whether flat-faced solids could do something similar.
- 2023: Domokos, Almádi, Krisztina Regős and Dawson characterized which tetrahedra, with suitably uneven weight, can be monostable.
- June 24, 2025: Almádi, Dawson and Domokos posted “Building a monostable tetrahedron,” describing the first working model, nicknamed Bille.
Can You Make Any Tetrahedron Self-Right?
No. A regular tetrahedron cannot become monostable just by adding a weight. The shape itself must have a path of three edges through all four vertices where neighboring faces meet at angles greater than 90 degrees (obtuse dihedral angles). Only then can the mass be placed so the center of mass lies in the small region that makes one face stable and the other three unstable.
How Do You Build One?
The trick is to put almost all the mass in one small region, so the center of mass sits in exactly the right place. Almádi used a computer search to find a workable shape. The team worked with a Hungarian precision engineering firm.
Bille combines a very light carbon fiber tube frame, about 2 grams, with a dense tungsten carbide alloy weight, about 118 grams. The materials differ in density by a factor of only about 10. The huge effective contrast, thousands of times, comes from the hollow frame: its small mass is spread over the large, mostly empty volume it outlines. The model measures 50 centimeters along its longest edge and needed tolerances of about 0.1 gram and 0.1 millimeter. A 2026 analysis by the same group reported designs needing a smaller density ratio, around 2,000, though not proved to be the minimum possible.
Why It Matters
Self-righting shapes are useful wherever something must land the right way up without help. Researchers have mentioned lunar landers as one possible application: a craft that always rights itself. More broadly, the work shows how a pure geometry question, about centers of mass and faces, can push engineering to its limits.
Try It Yourself
For a uniform solid, the center of mass of a tetrahedron is the average of its four vertices. With coordinates \((0,0,0), (1,0,0), (0,1,0), (0,0,1)\), the center is \(\left(\tfrac14, \tfrac14, \tfrac14\right)\). For this particular tetrahedron, its projection lands inside each of the four faces, so all four faces are stable. That is not true of every uniform tetrahedron: some have only two stable faces, but none has fewer than two.
Common Misconceptions
“Any tetrahedron can be made monostable with a heavy enough weight.” No. The shape must have the right obtuse dihedral angles first.
“The gömböc and the monostable tetrahedron are the same idea.” They are related, but the gömböc is smooth and uniform, while the tetrahedron has flat faces and uneven weight.
Watch: The Monostable Tetrahedron in Video
If you learn better by watching, these videos are worth your time.
Check Your Understanding
Five quick questions to see how much of this has stuck. Pick an answer and press Submit; you will see a short explanation either way.
Answer each question and press Submit to see your result right away.
Frequently Asked Questions
What is a monostable tetrahedron?
A tetrahedron that has only one stable face: wherever you place it, it rolls until that face is down. It must have uneven weight distribution.
Who built the first monostable tetrahedron?
Gergő Almádi, Robert Dawson and Gábor Domokos, working with a Hungarian precision engineering firm, described the first working model in June 2025.
Why can’t a uniform tetrahedron be monostable?
For uniform density, the center of mass projects inside every face, so every face is stable. Conway and Guy showed this after asking the question in 1966.
What is the monostable tetrahedron made of?
A carbon fiber tube frame of about 2 grams and a tungsten carbide alloy weight of about 118 grams. It weighs 120 grams and is 50 centimeters along its longest edge.
Does the monostable tetrahedron always land on the same face?
On a flat horizontal surface it has only one stable resting face, so from any other face it tips until that face is down. On uneven ground or after a bounce, real behavior can differ.
Keep Exploring
- Noperthedron: Why This Shape Can’t Pass Through Itself
- Einstein Tile Explained: Hat, Spectre and 3D Chair44
- Dudeney’s Dissection: Triangle to Square in 4 Pieces
Sources and Further Reading
Related to This Article
More math articles
- Rounding Numbers Up to the Millions
- Exterior Angle Theorem
- Grade 6 ELA Tests: A Clear Parent Guide to Reading, Writing, and Test-Day Readiness
- Stroke Volume Calculator
- The Best Calculator for the SAT or ACT
- Top 10 Free Websites for TSI Math Preparation
- Qualitative, Content, and Existing-Record Methods
- Patterns of Intergroup Relations
- How to Show the Relation in the Coordinate Plane
- An In-depth Exploration of How to Find the Codomain


What people say about "Monostable Tetrahedron: The Pyramid That Always Self-Rights - Effortless Math"?
No one replied yet.