DANB · ICE EXAM
DANB Infection Control (ICE) Exam Study Center. 4 content areas, 60 minutes.
Prepare for the DANB Infection Control (ICE) Exam: the current format and time, every content area with its approximate weight, how scoring works, and a study plan built on the official framework.
Exam details checked against DANB • Independent study guide • Not affiliated with DANB
MEET THE EXAM
Start with the current DANB ICE exam format.
Confirm current details with DANB.
The ICE exam is a component of DANB’s NELDA, Certified Dental Assistant (CDA) and Certified Orthodontic Assistant (COA) programs, and it is recognized in many states. It has no eligibility requirements.
You apply through DANB and have a 60-day test window; you can test at a test center or by online remote proctoring. It is also offered in Spanish.
This independent guide supports study planning. DANB controls eligibility, registration, exam policy and certification decisions.
DANB ICE CONTENT
Cover every content area.
Approximate weights from the official test framework.
Prevention of Disease Transmission
What to know: This area covers how bloodborne, airborne, droplet and contact pathogens spread in the dental setting, reviewing medical histories, and hand hygiene technique (soap and water versus alcohol-based rub). It also tests choosing, donning and doffing PPE, and limiting aerosols and spatter with dental dams, high-volume evacuation and barriers.
Common trap: Candidates often think alcohol-based hand rub works on visibly soiled hands, but CDC guidance calls for soap and water when hands are visibly dirty or contaminated.
Study tip: Write out the CDC donning and doffing order from memory until you can do it without notes, since sequence questions are common.
Prevention of Cross-contamination
What to know: The largest domain tests cleaning and disinfecting clinical contact and housekeeping surfaces, choosing EPA-registered disinfectants by level and contact time, and using surface barriers. Expect questions on aseptic tray setups, dental unit waterline monitoring (500 CFU/mL or less of heterotrophic bacteria), evacuation line and trap care, disinfecting impressions and appliances, and biohazard waste disposal.
Common trap: Many test takers skip the precleaning step, but a disinfectant cannot work properly on a surface still covered in bioburden.
Study tip: Make a table of each surface or item, its Spaulding category and the exact way it is handled between patients.
Process Instruments and Devices
What to know: This domain follows the instrument workflow from transport of contaminated items through cleaning (ultrasonic or washer-disinfector), packaging, labeling, sterilizer loading, and sterile storage. It also covers sterilizer monitoring with mechanical, chemical and biological indicators and what to do when a spore test fails.
Common trap: A color-changed chemical indicator does not prove sterilization; only a biological indicator (spore test) confirms microorganisms were killed.
Study tip: Draw the one-way flow of the sterilization area (dirty to clean) and label where each indicator type is used.
Occupational Safety and Administration Protocols
What to know: Expect OSHA Bloodborne Pathogens Standard topics such as the exposure control plan, engineering and work practice controls, sharps safety, hepatitis B vaccination, post-exposure steps and training records. The OSHA Hazard Communication Standard (safety data sheets, secondary container labels) and the roles of CDC, EPA and FDA also appear.
Common trap: Mixing up agencies is common: OSHA protects workers, EPA registers surface disinfectants, FDA clears sterilizers and medical devices, and CDC writes guidelines rather than laws.
Study tip: Build a one-page cheat sheet that pairs each agency with what it regulates and one example question for each.
Weights come from DANB’s ICE exam outline. Every test taker gets the same percentage of questions from each domain.
A SIMPLE STUDY ROUTE
Prepare from the framework to timed practice.
Build around your evidence and weak areas.
- 01
Read the framework. Use the official objectives for each content area as your checklist.
- 02
Weight your time. Give the most time to Prevention of Cross-contamination, the largest area.
- 03
Practise the format. Use the official preparation materials and practice tests for this field.
- 04
Rehearse under time. Complete a full timed practice session (60 min).
DANB ICE Practice Test: 10 Free Questions
Test your infection control knowledge with 10 original questions spread across the four ICE domains. Choose an answer and press Submit to see the explanation.
Answer each question and press Submit to see your result right away.
Answer each question and press Submit to see your result right away.
STUDY AND OFFICIAL RESOURCES
Use practice resources alongside official guidance.
DANB maintains the current outline and exam policies.
QUICK ANSWERS
DANB ICE preparation questions.
How soon do I get my DANB ICE results?
DANB’s outline says results are emailed within 1 to 3 business days and are also posted in your online DANB account. Your result is a scaled score, not a number or percent correct.
What references does the ICE exam use?
DANB’s ICE outline lists sources such as CDC infection control guidelines, the OSHA Bloodborne Pathogens and Hazard Communication Standards, and EPA and FDA rules. Studying those primary documents along with a dental infection control textbook covers most of what is tested.
How should I study for the DANB ICE exam?
Use DANB’s ICE outline as a checklist and spend about a third of your time on cross-contamination, the largest domain. Then focus on sterilization monitoring and OSHA rules, and finish with timed practice so 75 questions in 60 minutes feels comfortable.
How long is DANB ICE?
60 minutes of testing time.
How many questions are on DANB ICE?
75 multiple-choice questions.
What does DANB ICE cover?
Prevention of Disease Transmission (about 20%); Prevention of Cross-contamination (about 34%); Process Instruments and Devices (about 26%); Occupational Safety and Administration Protocols (about 20%).
What score do I need on DANB ICE?
DANB reports a scaled score from 100 to 900, and you need at least 400 to pass. Because the exam is adaptive, the score reflects the difficulty of the questions you answer correctly, and the average test taker answers about 50% of them correctly.
Is this an official DANB study center?
No. This is an independent preparation guide and is not affiliated with or endorsed by DANB.
SOURCE NOTES
Official references for this guide.
- DANB: Infection Control exam
- DANB: ICE exam outline and references (PDF)
- DANB: 4 important details to know about DANB exams
Exam dates, fees, eligibility requirements, delivery options and testing rules can change. Always confirm current details with DANB before registering. Mometrix and DANB are referenced for identification only; this guide is independently produced.